Opto electriccomposite cable for access networks
Application：
The cable is mainly used in DC remotepower supply system or area difficult to get power.
Mainly solve the communication and power supply problems of FTTH ormobile communication network terminal equipment
Characteristics：
Allow opticalcommunications and power supply simultaneously;
Excellent lateral pressure-resistant,mechanical and temperature performance.
OperatingTemperature:-40℃～﹢70℃
TransmissionPerformance
FiberType | 62.5μm(OM1) 850nm/1300nm | 50μm(OM2) 850nm/1300nm | G.652 1310nm/1550nm | G.655 1550nm/1625nm |
Attenuation Value Max (dB/km) | 3.5/1.5 | 3.5/1.5 | 0.36/0.22 | 0.22/0.26 |
Typical Attenuation Value (dB/km) | 3.5/1.5 | 3.0/1.0 | 0.35/0.21 | 0.21/0.24 |
Note:Othertypes of fiber can be provided according to the customer’s demands.
GDFJH
Product Structure：
Standards：
YD/T 2159-2010 Optoelectric composite cable for access network
Technical Parameters(Typical Value):
Fiber Count | Conductor Size | Diameter (mm) | Weight (kg/km) | Tensile(N) Long Short term term | Crush(N) Long Short term term | Bending Radius(mm) Static Dynamic |
1 | 2×1.0 | 8.5 | 155 | 400 | 800 | 1000 | 3000 | 10D | 20D |
2 | 2×1.0 | 8.5 | 155 | 400 | 800 | 1000 | 3000 | 10D | 20D |
Note 1. D refers to the cable diameter;
2.The relevant technical Parameters canbe adjusted according to the customer’s demands;
3.The water-blocking way can be adjustedaccording to the customer’s demands;
4.Flame-resistant, anti-rodent, anti- termitecable can be designed according to the customer’s demands.
